DIN 6499 Collet Chuck Manufacturers,DIN 6499 Collet Chuck Wholesale

ANSI B5.50 Precision Drill Chuck Holder

CAT-CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life

1)worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy

2)Runout reach 0.05mm

3)Claw use Nitriding Porcess
DIN 69893 ER Collet Chuck with Mini Nut
HSK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability
DIN 69893 HSK-SKS Collet Chuck
SKS Collet Chuck

HSK-SKS Collet Chuck is very good at for high speed processing especially for electronic workpiece processing

1, The nut is designed in a full round, with small wind resistance and low noise, G2.5/25000 RPM ensure stable high-speed processing

2, The collet adopts a unilateral 4° design, which bring higher repeat clamping accuracy.

3, Slim body compared with ER collets, has stronger air avoidance.
DIN 69893 TG Collet Chuck
HSK-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
DIN 69893 Pull Back Collet Chuck

Pull Back Collet Chuck

Built-in collet design

More suitable for high speed machining

Reduced interference when machining without nuts

DIN 69893 Face Mill Holder Inch

Face Mill Holder

Face milling tool holder is a kind of tool holder specially used for face milling cutters

1.Good rigidity

2.High cutting efficiency

3.Convenient operation

Size	d	D	H	L	M
HSK63A-FMA3/4"-50	3/4"	42.926	17.45	50	3/8-24
HSK63A-FMA1"-60	1"	55.626	17.45	60	1/2-20
HSK63A-FMA1-1/4"-60	1-1/4"	69.85	17.45	60	5/8-18
HSK63A-FMA1-1/2"-60	1-1/2"	78	23.83	60	3/4-16
HSK63A-FMA3/4"-100	3/4"	42.926	17.45	100	3/8-24
HSK63A-FMA1"-100	1"	55.626	17.45	100	1/2-20
HSK63A-FMA1-1/4"-100	1-1/4"	69.85	17.45	100	5/8-18
HSK63A-FMA1-1/2"-100	1-1/2"	78	23.83	100	3/4-16
HSK63A-FMA3/4"-160	3/4"	42.926	17.45	160	3/8-24
HSK63A-FMA1"-160	1"	55.626	17.45	160	1/2-20
HSK63A-FMA1-1/4"-160	1-1/4"	69.85	17.45	160	5/8-18
HSK63A-FMA1-1/2"-160	1-1/2"	78	23.83	160	3/4-16

HSK100A-FMA3/4"-50	3/4"	42.926	17.45	50	3/8-24
HSK100A-FMA1"-50	1"	55.626	17.45	50	1/2-20
HSK100A-FMA1-1/4"-60	1-1/4"	69.85	17.45	60	5/8-18
HSK100A-FMA1-1/2"-60	1-1/2"	78	23.83	60	3/4-16
HSK100A-FMA3/4"-100	3/4"	42.926	17.45	100	3/8-24
HSK100A-FMA1"-100	1"	55.626	17.45	100	1/2-20
HSK100A-FMA1-1/4"-100	1-1/4"	69.85	17.45	100	5/8-18
HSK100A-FMA1-1/2"-100	1-1/2"	78	23.83	100	3/4-16
HSK100A-FMA3/4"-160	3/4"	42.926	17.45	160	3/8-24
HSK100A-FMA1"-160	1"	55.626	17.45	160	1/2-20
HSK100A-FMA1-1/4"-160	1-1/4"	69.85	17.45	160	5/8-18
HSK100A-FMA1-1/2"-160	1-1/2"	78	23.83	160	3/4-16

DIN 69893 Face Mill Holder

Face Mill Holder

HSKA-FMB face milling tool holder is a kind of tool holder specially used for face milling cutters

1.Good rigidity

2.High cutting efficiency

3.Convenient operation

Size

HSK50A-FMB16-50

HSK50A-FMB22-60

M10

HSK50A-FMB27-60

M12

HSK50A-FMB32-60

M16

HSK63A-FMB16-50

HSK63A-FMB22-50

M10

HSK63A-FMB27-60

M12

HSK63A-FMB32-60

M16

HSK63A-FMB16-100

100

HSK63A-FMB22-100

100

M10

HSK63A-FMB27-100

100

M12

HSK63A-FMB32-100

100

M16

HSK63A-FMB16-160

160

HSK63A-FMB22-160

160

M10

HSK63A-FMB27-160

160

M12

HSK63A-FMB32-160

160

M16

HSK63A-FMB16-200

200

HSK63A-FMB22-200

200

M10

HSK63A-FMB27-200

200

M12

HSK63A-FMB32-200

200

M16

HSK80A-FMB22-50

M10

HSK80A-FMB27-50

M12

HSK80A-FMB32-60

M16

HSK100A-FMB22-50

M10

HSK100A-FMB27-50

M12

HSK100A-FMB32-60

M16

HSK100A-FMB22-100

100

M10

HSK100A-FMB27-100

100

M12

HSK100A-FMB32-100

100

M16

HSK100A-FMB22-160

160

M10

HSK100A-FMB27-160

160

M12

HSK100A-FMB32-160

160

M16

HSK100A-FMB22-200

200

M10

HSK100A-FMB27-200

200

M12

HSK100A-FMB32-200

DIN 69893 Combi Shell Mill Holder

Combi Shell Mill Holder

HSKA Combi Shell Mill Holders with small face showing reduced connection diameter following ISO 3937 standard are perfectly suited for all Shell end type disc milling cutter (B Type) but are also suitable for some copy / high feed /square shoulder / helical cutter.

Size	d	D	L	H
HSK50A-SEMC16-50	16	32	50	17
HSK50A-SEMC22-50	22	40	50	19
HSK50A-SEMC27-65	27	48	65	21
HSK50A-SEMC32-65	32	58	65	24

HSK63A-SEMC16-60	16	32	60	17
HSK63A-SEMC22-60	22	40	60	19
HSK63A-SEMC27-60	27	48	60	21
HSK63A-SEMC32-60	32	58	60	24
HSK63A-SEMC40-70	40	70	70	27

HSK63A-SEMC16-100	16	32	100	17
HSK63A-SEMC22-100	22	40	100	19
HSK63A-SEMC27-100	27	48	100	21
HSK63A-SEMC32-100	32	58	100	24

Size	d	D	L	L1
HSK80A-SEMC16-60	16	32	60	17
HSK80A-SEMC22-60	22	40	60	19
HSK80A-SEMC27-60	27	48	60	21
HSK80A-SEMC32-60	32	58	60	24
HSK80A-SEMC40-70	40	70	70	27

HSK100A-SEMC16-60	16	32	60	17
HSK100A-SEMC22-60	22	40	60	19
HSK100A-SEMC27-60	27	48	60	21
HSK100A-SEMC32-60	32	58	60	24
HSK100A-SEMC40-70	40	70	70	27

DIN 69893 End Mill Holder with Coolant Channels

End Mill Holder with Coolant Channels

HSKA End mill holders hold cutting tools with more rigidity than collets.

Available in Weldon type for using tools with Weldon flats.

Easy to use for clamping tools and disassemble tools.

This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet

DIN 69893 End Mill Holder with Coolant Channels

End Mill Holder Whistle Notch

HSKA End mill holders hold cutting tools with more rigidity than collets.

Available in Weldon type for using tools with Weldon flats. Easy to use for clamping tools and disassemble tools.

This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet

<<Previous << 11 12 13 14 >> Next>>

Leave a message