-
Contact us
- Office Address: 253000, Chongde 5th Avenue, Gaotie New District, Dezhou, China
- Tel: +86-534-8127588
- Mob: +86-18865728871
- Email: sales@bright-tools.com
- Skype: sdjinjie101
-
DIN69893 HSK-F Shrink Chuck Taper
The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.
-
Precision Drill Chuck Holder
BT CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life
-
MAS 403 TG Collet Chuck
MAS 403 Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
-
MAS 403 TG Collet Chuck
BT-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
-
MAS 403 Pull Back Collet Chuck
Pull Back Collet Chuck
Built-in collet design
More suitable for high speed machining
Reduced interference when machining without nuts
-
DIN 69871 SK APU Drill Chuck Holder
APU Drill Chuck Holder
SK-APU Used for clamping and fixing drill bits, APU tool handle can be adjusted by a hook wrench to realize clamping and releasing cutting tools, easy to operate and easy to replace tools.
-
DIN 69871 SK Precision Drill Chuck Holder
Precision Drill Chuck Holder
SK-CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life
1)worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy
2)Runout reach 0.05mm
3)Claw use Nitriding Porcess
-
ANSI B5.50 ER Collet Chuck with Hex Nut
CAT-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.
1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40
2. Easy to operate
3, Wide applicability
-
ANSI B5.50 Precision Drill Chuck Holder
CAT-CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life
1)worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy
2)Runout reach 0.05mm
3)Claw use Nitriding Porcess
-
DIN 69893 ER Collet Chuck with Mini Nut
HSK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.
1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40
2. Easy to operate
3, Wide applicability
Leave a message
