Hydraulic Collet Manufacturers,hydraulic Collet Wholesale

DIN69871 SK Hydraulic Chuck, for Mould
SK type Hydraulic holder is popular used by woodworking industry, With a few simple actions, the tool can be changed quickly and rocess reliably. Insert the tool into the hydraulic expansion toolholder, use an Allen key to screw in the clamping screw to dead stop – finished! It is ime savings due to reduced set-up times and no investment and ergy costs for additional clamping devices.
DIN69893 HSK Hydraulic Chuck, for Mould
HSK type Hydraulic holder is popular used by woodworking industry, With a few simple actions, the tool can be changed quickly and rocess reliably. Insert the tool into the hydraulic expansion toolholder, use an Allen key to screw in the clamping screw to dead stop – finished! It is ime savings due to reduced set-up times and no investment and ergy costs for additional clamping devices.
DIN69871 Hydraulic Chuck, for Grind
SK type Hydraulic holder is popular used by woodworking industry, With a few simple actions, the tool can be changed quickly and rocess reliably. Insert the tool into the hydraulic expansion toolholder, use an Allen key to screw in the clamping screw to dead stop – finished! It is ime savings due to reduced set-up times and no investment and ergy costs for additional clamping devices.
MTB Hydraulic Chuck
MTB type Hydraulic holder is popular used by woodworking industry, With a few simple actions, the tool can be changed quickly and rocess reliably. Insert the tool into the hydraulic expansion toolholder, use an Allen key to screw in the clamping screw to dead stop – finished! It is ime savings due to reduced set-up times and no investment and ergy costs for additional clamping devices.
Hydraulic collet
Hydraulic Collet, Coolant
Hydraulic Collet, Coolant

Run-out accuracy ≤ 0.003 mm
For internal coolant supply
MAS 403 Pull Back Collet Chuck
Pull Back Collet Chuck

Built-in collet design

More suitable for high speed machining

Reduced interference when machining without nuts
ANSI B5.50 ER Collet Chuck with Hex Nut
CAT-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability
DIN 69893 ER Collet Chuck with Mini Nut
HSK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability
DIN 69893 HSK-SKS Collet Chuck
SKS Collet Chuck

HSK-SKS Collet Chuck is very good at for high speed processing especially for electronic workpiece processing

1, The nut is designed in a full round, with small wind resistance and low noise, G2.5/25000 RPM ensure stable high-speed processing

2, The collet adopts a unilateral 4° design, which bring higher repeat clamping accuracy.

3, Slim body compared with ER collets, has stronger air avoidance.

<<Previous << 1 2 3 4 5 6 7 8 9 >> Next>>