-
Contact us
- Office Address: 253000, Chongde 5th Avenue, Gaotie New District, Dezhou, China
- Tel: +86-534-8127588
- Mob: +86-18865728871
- Email: sales@bright-tools.com
- Skype: sdjinjie101
-
Precision Drill Chuck Holder
BT CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life
-
MAS 403 TG Collet Chuck
MAS 403 Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
-
MAS 403 TG Collet Chuck
BT-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
-
MAS 403 Pull Back Collet Chuck
Pull Back Collet Chuck
Built-in collet design
More suitable for high speed machining
Reduced interference when machining without nuts
-
MAS 403 BT End Mill Holder with Coolant Channels
BT End mill holders hold cutting tools with more rigidity than collets.
Available in Weldon type for using tools with Weldon flats. Easy to use for clamping tools and disassemble tools. This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet
-
MAS 403 BT End Mill Holder Whistle Notch
Easy to use for clamping tools and disassemble tools.
This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet.
-
MAS 403 BT Screw-in Milling Cutter Holder
MAS 403 BT SOM tool holder is connected the tools directly, this improve processing accuracy, rigidity and easy to make tools exchange
1. High precision
2. High rigidity, improving quality and reducing consumption.
3. Improve efficiency.
4. Convenience
-
MAS403 BT Runout Adjustable Flange Adapter
MAS 403 BT Runout Adjustable Flange Adapter
Flange tool holders need to be used in conjunction with flange cutters.
The flange holder can adjust the tool to within 1u jump through the handle screw.
Generally used in the manufacture of high precision machining industries such as automobiles/aerospace
-
MAS403 BT Boring Bar Blank
Boring Bar Blank
Tool holder blanks is widely used for secondary processing
Taper with collar, hardened and ground, Hardness 50-55HRC.
Soft shank for further machining, Hardness 35-45HRC
-
MAS403 BT Test Arbor
Test Arbor
Used for detecting the concentricity of the spindle.
Wooden box packing, store vertically to prevent the detection rod from being deformed and losing accuracy due to horizontal storage.
Accuracy: <0.003mm
Leave a message
