UM Adjustable Tool Holder

Extremely tight bore tolerances

High process reliability can be ensured

Boring Bar Blank

Tool holder blanks is widely used for secondary processing

Taper with collar, hardened and ground, Hardness 50-55HRC.

Soft shank for further machining, Hardness 35-45HRC

Alignment Tool For ATC Arm

SK-ATC Arm Alignment tools is used to correct the Arm position, Long-term use of the Arm will cause different degrees of wear and deformation, so that the tool cannot be effectively clamped, stored in the tool warehouse, and the Alignment tool can effectively adjust the Arm position to solve this problem

CAT-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications:  ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability

CAT-CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life

1)worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy  

2)Runout reach 0.05mm

3)Claw use Nitriding Porcess

HSK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications:  ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability

SKS Collet Chuck

HSK-SKS Collet Chuck is very good at for high speed processing especially for electronic workpiece processing

1, The nut is designed in a full round, with small wind resistance and low noise, G2.5/25000 RPM ensure stable high-speed processing

2, The collet adopts a unilateral 4° design, which bring higher repeat clamping accuracy.

3, Slim body compared with ER collets, has stronger air avoidance.

HSK-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing