Easy to use for clamping tools and disassemble tools.

This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet.

MAS 403 BT Runout Adjustable Flange Adapter

Flange tool holders need to be used in conjunction with flange cutters.

The flange holder can adjust the tool to within 1u jump through the handle screw.

Generally used in the manufacture of high precision machining industries such as automobiles/aerospace

Boring Bar Blank

Tool holder blanks is widely used for secondary processing

Taper with collar, hardened and ground, Hardness 50-55HRC.

Soft shank for further machining, Hardness 35-45HRC

Test Arbor

Used for detecting the concentricity of the spindle.

Wooden box packing, store vertically to prevent the detection rod from being deformed and losing accuracy due to horizontal storage.

Accuracy: <0.003mm

Alignment Tool For ATC Arm

ATC Arm Alignment tools is used to correct the Arm position, Long-term use of the Arm will cause different degrees of wear and deformation, so that the tool cannot be effectively clamped, stored in the tool warehouse, and the Alignment tool can effectively adjust the Arm position to solve this problem

ER Collet Chuck with UM Nut

SK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.

1.Various specifications:  ER11, ER16, ER20, ER25, ER32, ER40

2. Easy to operate

3, Wide applicability

Power Milling Chuck

SK-Milling chuck is suitable for drilling and heavy cutting, High clamping force increases productivity and extends tool life

1.Triple seal to prevent iron filings and coolant pollution

2. Contains ball bearings to reduce frictional resistance and parts loss during locking

3. High beating accuracy, 3 times the diameter beating 5-8u

Pull Back Collet Chuck

Built-in collet design

More suitable for high speed machining

Reduced interference when machining without nuts

End Mill Holder Whistle Notch

End mill holders hold cutting tools with more rigidity than collets. Available in Weldon type for using tools with Weldon flats.

Easy to use for clamping tools and disassemble tools.

This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet.