-
Contact us
- Office Address: 253000, Chongde 5th Avenue, Gaotie New District, Dezhou, China
- Tel: +86-534-8127588
- Mob: +86-18865728871
- Email: sales@bright-tools.com
- Skype: sdjinjie101
-
DIN 69893 TG Collet Chuck
HSK-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
-
DIN 69893 Pull Back Collet Chuck
Pull Back Collet Chuck
Built-in collet design
More suitable for high speed machining
Reduced interference when machining without nuts
-
DIN 69893 Face Mill Holder Inch
Face Mill Holder
Face milling tool holder is a kind of tool holder specially used for face milling cutters
1.Good rigidity
2.High cutting efficiency
3.Convenient operation
Size d D H L M HSK63A-FMA3/4"-50 3/4" 42.926 17.45 50 3/8-24 HSK63A-FMA1"-60 1" 55.626 17.45 60 1/2-20 HSK63A-FMA1-1/4"-60 1-1/4" 69.85 17.45 60 5/8-18 HSK63A-FMA1-1/2"-60 1-1/2" 78 23.83 60 3/4-16 HSK63A-FMA3/4"-100 3/4" 42.926 17.45 100 3/8-24 HSK63A-FMA1"-100 1" 55.626 17.45 100 1/2-20 HSK63A-FMA1-1/4"-100 1-1/4" 69.85 17.45 100 5/8-18 HSK63A-FMA1-1/2"-100 1-1/2" 78 23.83 100 3/4-16 HSK63A-FMA3/4"-160 3/4" 42.926 17.45 160 3/8-24 HSK63A-FMA1"-160 1" 55.626 17.45 160 1/2-20 HSK63A-FMA1-1/4"-160 1-1/4" 69.85 17.45 160 5/8-18 HSK63A-FMA1-1/2"-160 1-1/2" 78 23.83 160 3/4-16 HSK100A-FMA3/4"-50 3/4" 42.926 17.45 50 3/8-24 HSK100A-FMA1"-50 1" 55.626 17.45 50 1/2-20 HSK100A-FMA1-1/4"-60 1-1/4" 69.85 17.45 60 5/8-18 HSK100A-FMA1-1/2"-60 1-1/2" 78 23.83 60 3/4-16 HSK100A-FMA3/4"-100 3/4" 42.926 17.45 100 3/8-24 HSK100A-FMA1"-100 1" 55.626 17.45 100 1/2-20 HSK100A-FMA1-1/4"-100 1-1/4" 69.85 17.45 100 5/8-18 HSK100A-FMA1-1/2"-100 1-1/2" 78 23.83 100 3/4-16 HSK100A-FMA3/4"-160 3/4" 42.926 17.45 160 3/8-24 HSK100A-FMA1"-160 1" 55.626 17.45 160 1/2-20 HSK100A-FMA1-1/4"-160 1-1/4" 69.85 17.45 160 5/8-18 HSK100A-FMA1-1/2"-160 1-1/2" 78 23.83 160 3/4-16 -
DIN 69893 Face Mill Holder
Face Mill Holder
HSKA-FMB face milling tool holder is a kind of tool holder specially used for face milling cutters
1.Good rigidity
2.High cutting efficiency
3.Convenient operation
Size d D H L M HSK50A-FMB16-50 16 38 17 50 M8 HSK50A-FMB22-60 22 48 19 60 M10 HSK50A-FMB27-60 27 58 21 60 M12 HSK50A-FMB32-60 32 78 24 60 M16 HSK63A-FMB16-50 16 38 17 50 M8 HSK63A-FMB22-50 22 48 19 50 M10 HSK63A-FMB27-60 27 58 21 60 M12 HSK63A-FMB32-60 32 78 24 60 M16 HSK63A-FMB16-100 16 38 17 100 M8 HSK63A-FMB22-100 22 48 19 100 M10 HSK63A-FMB27-100 27 58 21 100 M12 HSK63A-FMB32-100 32 78 24 100 M16 HSK63A-FMB16-160 16 38 17 160 M8 HSK63A-FMB22-160 22 48 19 160 M10 HSK63A-FMB27-160 27 58 21 160 M12 HSK63A-FMB32-160 32 78 24 160 M16 HSK63A-FMB16-200 16 38 17 200 M8 HSK63A-FMB22-200 22 48 19 200 M10 HSK63A-FMB27-200 27 58 21 200 M12 HSK63A-FMB32-200 32 78 24 200 M16 HSK80A-FMB22-50 22 48 19 50 M10 HSK80A-FMB27-50 27 58 21 50 M12 HSK80A-FMB32-60 32 78 24 60 M16 HSK100A-FMB22-50 22 48 19 50 M10 HSK100A-FMB27-50 27 58 21 50 M12 HSK100A-FMB32-60 32 78 24 60 M16 HSK100A-FMB22-100 22 48 19 100 M10 HSK100A-FMB27-100 27 58 21 100 M12 HSK100A-FMB32-100 32 78 24 100 M16 HSK100A-FMB22-160 22 48 19 160 M10 HSK100A-FMB27-160 27 58 21 160 M12 HSK100A-FMB32-160 32 78 24 160 M16 HSK100A-FMB22-200 22 48 19 200 M10 HSK100A-FMB27-200 27 58 21 200 M12 HSK100A-FMB32-200 32 78 24 <s 
DIN 69893 Combi Shell Mill Holder
Combi Shell Mill Holder
HSKA Combi Shell Mill Holders with small face showing reduced connection diameter following ISO 3937 standard are perfectly suited for all Shell end type disc milling cutter (B Type) but are also suitable for some copy / high feed /square shoulder / helical cutter.
Size d D L H HSK50A-SEMC16-50 16 32 50 17 HSK50A-SEMC22-50 22 40 50 19 HSK50A-SEMC27-65 27 48 65 21 HSK50A-SEMC32-65 32 58 65 24 HSK63A-SEMC16-60 16 32 60 17 HSK63A-SEMC22-60 22 40 60 19 HSK63A-SEMC27-60 27 48 60 21 HSK63A-SEMC32-60 32 58 60 24 HSK63A-SEMC40-70 40 70 70 27 HSK63A-SEMC16-100 16 32 100 17 HSK63A-SEMC22-100 22 40 100 19 HSK63A-SEMC27-100 27 48 100 21 HSK63A-SEMC32-100 32 58 100 24 Size d D L L1 HSK80A-SEMC16-60 16 32 60 17 HSK80A-SEMC22-60 22 40 60 19 HSK80A-SEMC27-60 27 48 60 21 HSK80A-SEMC32-60 32 58 60 24 HSK80A-SEMC40-70 40 70 70 27 HSK100A-SEMC16-60 16 32 60 17 HSK100A-SEMC22-60 22 40 60 19 HSK100A-SEMC27-60 27 48 60 21 HSK100A-SEMC32-60 32 58 60 24 HSK100A-SEMC40-70 40 70 70 27 
DIN 69893 End Mill Holder with Coolant Channels
End Mill Holder with Coolant Channels
HSKA End mill holders hold cutting tools with more rigidity than collets.
Available in Weldon type for using tools with Weldon flats.
Easy to use for clamping tools and disassemble tools.
This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet
DIN 69893 End Mill Holder with Coolant Channels
End Mill Holder Whistle Notch
HSKA End mill holders hold cutting tools with more rigidity than collets.
Available in Weldon type for using tools with Weldon flats. Easy to use for clamping tools and disassemble tools.
This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet
DIN 69893 Face Mill Holder
Face Mill Holder
HSKA-FMB face milling tool holder is a kind of tool holder specially used for face milling cutters
1.Good rigidity
2.High cutting efficiency
3.Convenient operation
DIN 69893 Boring Bar Blank
Boring Bar Blank
HSKA Tool holder blanks is widely used for secondary processing
Taper with collar, hardened and ground, Hardness 50-55HRC.
Soft shank for further machining, Hardness 35-45HRC
DIN 69893 APU Drill Chuck Holder
APU Drill Chuck Holder
Used for clamping and fixing drill bits, APU tool handle can be adjusted by a hook wrench to realize clamping and releasing cutting tools, easy to operate and easy to replace tools.
Leave a message
Copyright © 2025 Dezhou Creater CNC Tech. Co., Ltd.All Rights Reserved. Powered by dyyseo.com
