CNC Milling Tool Holder Manufacturers,CNC Milling Tool Holder Wholesale

MTB Hydraulic Chuck
MTB type Hydraulic holder is popular used by woodworking industry, With a few simple actions, the tool can be changed quickly and rocess reliably. Insert the tool into the hydraulic expansion toolholder, use an Allen key to screw in the clamping screw to dead stop – finished! It is ime savings due to reduced set-up times and no investment and ergy costs for additional clamping devices.
Hydraulic collet
Hydraulic Collet, Coolant
Hydraulic Collet, Coolant

Run-out accuracy ≤ 0.003 mm
For internal coolant supply
MAS 403 BT Tool Holder Adatper Sleeve
Copy spindle connection, stronger rigidity and higher precision.

1) Can be used for tool setting instrument

2) Can be used as a fixture, quick clamping improves efficiency.

3) It can be applied to non-standard tool processing to save costs.
JIS B 6339 BT Tool Holder Adatper Sleeve
It realize the exchange between BT30& BT40, BT40&BT50
Precision Drill Chuck Holder
BT CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life
MAS 403 TG Collet Chuck

MAS 403 Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
MAS 403 TG Collet Chuck
BT-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
MAS 403 Pull Back Collet Chuck
Pull Back Collet Chuck

Built-in collet design

More suitable for high speed machining

Reduced interference when machining without nuts
MAS 403 BT End Mill Holder with Coolant Channels

BT End mill holders hold cutting tools with more rigidity than collets.

Available in Weldon type for using tools with Weldon flats. Easy to use for clamping tools and disassemble tools. This clamping system assures the end mill cannot spin in the holder during a heavy cut as is possible in a collet

<<Previous << 21 22 23 24 25 26 27 28 29 30 >> Next>>