-
Contact us
- Office Address: 253000, Chongde 5th Avenue, Gaotie New District, Dezhou, China
- Tel: +86-534-8127588
- Mob: +86-18865728871
- Email: sales@bright-tools.com
- Skype: sdjinjie101
| Model | D | d1 | d2 | d3 | d4 | d5 | d6 | d7 | l1 | l2 | l3 | l4 | l5 | e1 | e2 |
| SK30 | 50 | 31.75 | 59.3 | 44.3 | 45 | 13 | 16.1 | 4 | 47.8 | 24 | 19 | 16.4 | 15 | 21 | 5 |
| SK40 | 63.55 | 44.45 | 72.3 | 56.25 | 50 | 17 | 16.1 | 4 | 68.4 | 32 | 25 | 22.8 | 18.5 | 27 | 5 |
| SK50 | 97.5 | 69.85 | 107.25 | 91.25 | 80 | 25 | 25.7 | 6 | 101.8 | 47 | 37.7 | 35.5 | 30 | 42 | 7 |
ISO30, ISO40, ISO50, SK30, SK40, SK50 Tool Holders
Manufactured from alloy steel with good core strength and long wear life.
Tool Holder Standard is DIN 69871 SK.
Toolholder Taper ground to AT3 or better accuracy standard for maximum contact with spindle.
-
DIN 69871 SK Power Milling Chuck
Pull Back Collet Chuck
Built-in collet design
More suitable for high speed machining
Reduced interference when machining without nuts
-
DIN 69871 SK Power Milling Chuck
Power Milling Chuck
SK-Milling chuck is suitable for drilling and heavy cutting, High clamping force increases productivity and extends tool life
1.Triple seal to prevent iron filings and coolant pollution
2. Contains ball bearings to reduce frictional resistance and parts loss during locking
3. High beating accuracy, 3 times the diameter beating 5-8u
-
DIN 69871 SK ER Collet Chuck with UM Nut
ER Collet Chuck with UM Nut
SK-ER tool holder is a commonly used tool holder in machine tool processing. It is composed of a tool holder body and an ER collet. It is mainly used to clamp and fix straight-shank cutting tools such as drills and milling cutters machining.
1.Various specifications: ER11, ER16, ER20, ER25, ER32, ER40
2. Easy to operate
3, Wide applicability
-
DIN69871 SK Collet Chuck
DIN69871 SK Collet Chuck is for Clamping Tools with Straight Shank in Collets DIN6499 -
ER Collet Chuck with Mini Nut
DIN69871 Collet Chuck with Mini Nuts are for Clamping Tools with Straight Shank in Collets DIN6499 -
Collet Chuck without Drive Slots
Collet Chuck without Drive Slots are for Woodworking Industry. -
OZ Collet Chuck DIN6391
DIN69871 OZ Collet Chuck is for clamping tools with straight shank in collets DIN6388 -
Weldon End Mill Holder
Weldon Holder is for clamping tools with straight shank and inclined flat DIN1835-B -
Weldon Holder with Coolant Channels
End mill holders DIN 6359 with coolant channels for end mills DIN 1835-B -
Morse Taper Adapter DIN6383
Adaptor sleeves for MT with tang DIN 6383 is for mounting tools with Morse taper shank and tang according to DIN 228-1 form B.
Leave a message
